Cooperation between the MTF «Mostootryad 4» - a branch of JSC «MOSTOTREST» and «Technosvar KS» Ltd. successfully continues for more than 7 years.
The beginning of cooperation was the offer from «Teсhnosvar KS» Ltd. about the possibility of solving the technological problem of increasing the productivity of butt resistance welding of steel in blank production. This task was successfully accomplished by joint efforts of the specialists of Technosvar KS and MTF MO-4 by combining welding and flash trimming immediately after upset, while reducing wear on the surfaces of current-leading electrodes.
This method was implemented in the welding machine MSO-750. It is important to note that the machine MSO-750 is equipped with the newest hydro and electric equipment, this allows automatic change of the welding mode and store in the memory the necessary number of welding programs, which greatly simplified maintenance and operation in comparison with the earlier used butt resistance welding machines.
In addition, in 2016, specially for MTF «MO-4», on the basis of the welding machine MSO-750, two "experienced", fully automated lines for non- waste joining of armature bars with a diameter of 12 to 40 mm (using from 18 to 36 mm) with a maximum billet length of up to 30m were developed, installed, and are being introduced. The machine was additionally equipped with a control system with the functions of tolerance control of the welding process and certification of each welded joint. This made it possible to improve the quality of the work performed by reducing the time taken to flash trimming and seam cleaning. Overall productivity increased several times. And therefore improving the working conditions of staff.
We believe that the machine for butt flash welding MSO-750 meets all modern requirements for reliable and high-performance of welding equipment.In turn, we are ready to recommend «Technosvar KS» Ltd. as a responsible and reliable Supplier. We hope for further successful cooperation!
Chief Engineer of the MTF «MO-4»