PRODUCTION OF EQUIPMENT FOR CONTACT AND ARC WELDING

Cooperation between Nizhny Novgorod Aircraft Building Plant "Sokol" and "Technosvar KS" Ltd. hassuccessfully continued since 2014. During this time, your organization has successfully completed a number of projects to supply new and upgrade old welding equipment.

All presented equipment completely corresponds to specifications and the customer's wishes.

In addition, we note the present and quality of implementation of your obligations for the supply and commissioning of equipment.
Technical support and recommendations of your specialists helped to significantly improve the quality of work performed on the equipment supplied.
We are ready to recommend "Technosvar KS" Ltd. as a stable and responsible partner.

JSC "MMZ Avangard" expresses its gratitude for the timely adherence to the delivery time of the welding machine MTV-8002-1, the installation and adjustment of equipment by specialists of Technosvar KS Ltd. I want to note the high professionalism of your employees and their efficiency. The equipment manufactured by Technosvar KS Ltd. is of high quality and has proven itself in the best possible way during operation.

We are pleased to inform you of our positive feedback on the work of the MTV 8002-1 contact spot welding machine delivered by your company.

The machine provides high-quality welding of aluminium and magnesium alloys of our entire range of thicknesses up to 4mm. Moreover, its possibilities with these thicknesses are not exhausted. The availability of a special autonomous cooling station allows to exclude the costs of both consumption and disposal of technical water. 

The special requirements for the console heights, the values of the supplied electrode plug have ensured the possibility of welding our specific designs.

I express confidence in the continuation of our fruitful cooperation.

Cooperation between the MTF "Mostootryad 4" - a branch of JSC "MOSTOTREST" and "Technosvar KS" Ltd. successfully continues for more than 7 years.

The beginning of cooperation was the offer from Tekhnosvar KS Ltd. about the possibility of solving the technological problem of increasing the productivity of butt resistance welding of steel in blank production. 

In turn, we are ready to recommend "Technosvar KS" Ltd. as a responsible and reliable Supplier.

We hope for further successful cooperation!

Our company operates 3 (three) butt-resistance welding machines МСО-750, which were manufactured by your organization in full compliance with our Technical task. 

During the operation, this equipment has proven itself exclusively on the positive side, which allows us to produce high-quality products with minimal costs.

Technical support and recommendations of your specialists in setting up and using the machine helped to significantly improve the quality of the work performed.

I am ready to recommend Technosvar KS Ltd. as a stable and responsible partner. And hope for a continued and fruitful cooperation.

Weld joints’ quality has been confirmed in the course of laboratory tests. The results of Т-joint tests showed that the samples’ tensile strength was in the range of 580-630 N/mm2, which is a positive outcome.

We consider that the ADFS-3001 FN4 machine for submerged arc welding of embedded parts, manufactured by OOO «Technosvar KS», meets all up-to-date requirements for welding equipment, it is reliable and highly-efficient.

For my part, I recommend OOO «Technosvar KS» as a modern and responsible enterprise.

Looking forward to a further fruitful cooperation!

Cooperation between KTF “MO-125” – branch of PAO "MOSTOTREST" – and OOO “Technosvar” has been continuing since 2012.

Nowadays our enterprise uses five flush welding machines.

Especially we would like to register purchasing in-time and quality of realizing it, involving and service.

We consider that flush welding machines produced by OOO “Technosvar KS” meet all up-to-date requirements to welding machinery, they are reliable and high performance.

We hope on further collaboration!

We were purchased butt flash welding machine MSO-750. From the moment of starting-up operations and till today the machine showed itself only from the positive side.

It should be noted that because of maturity of welding and following trimming (flash removal) operations it makes possible to achieve higher productivity in comparison with butt flash welding machines used before.

We think that butt flash welding machine MSO-750 produced by OOO “Technosvar KS” meets all present requirements to welding equipment, it is reliable and with high level of productivity.

The machine ADFS-2001 for automatic welding of reinforcement bars to embedded fittings with inverter power source provides the same quality performance as the machine with electronic arc welder. The machine shows the same reliability as ones previously purchased.  Maximum performance of the machine is 323 embedded parts within the 12-hour working shift.

In the name of OOO «Reinforced concrete products of Siberia» I express gratitude to «Technosvar KS» for timely execution of the contract conditions concerning manufacturing and delivering of the butt flash welding machine MSO-750 NF4 for our company. I report that the equipment has been put into operation. I would like to draw special attention to the fact, that the welding machine is equipped by upset hydraulic cylinders with rated upset force of 10000 daN and clamping hydraulic cylinders with rated clamping force of 20000 daN, which allowed for the highest quality of the A500C class armature welding. The results of successful tests have been confirmed by our laboratory. Technical support and recommendations given by Technosvar specialists concerning machine set-up and usage helped us to improve performance standards significantly.

I recommend OOO «Technosvar KS» as a responsible producer and reliable supplier.

The quality of T-joints produced at ADFS-2001 UHL 4 corresponds to GOST-10922. Additionally because of using this welding machine the embedded parts production rate has been increased and labor inputs have been reduced in comparison with arc welding and countersinking that have been used before.

Since August 2014 our company has been operating a DC welding machine MTV-4800.

This equipment was manufactured by “Technosvar KS” Ltd. in full compliance with our technical task. During the operation of the machine has proven itself exclusively on the positive side. Separately I want to note the efficiency and work quality of your team.

After the introduction and installation of the MTV-4800 the production, quality and convenience of work by resistance spot welding of products has increased significantly.

We look forward to a continued and fruitful cooperation.

We are ready to recommend "Technosvar KS" Ltd. as a stable and responsible partner.

Our company operates a DC welding machine MTV 8002-2 since 2012.

This equipment was manufactured by “Technosvar KS” Ltd. in full compliance with our technical task. During its operation it has proved itself EXCLUSIVELY on the POSITIVE side. 

After the introduction of the equipment mentioned above, the quality and convenience of resistance spot welding of important structures increased significantly.

We look forward to a continued and fruitful cooperation.

We are ready to recommend "Technosvar KS" Ltd. as a stable and responsible partner

Our university, between 27-29 September carried out experimental work to determine the mechanical properties of the armature A-500S. Experimental work based upon your recommendation was used in the machine ADFS-2001. When the welded joints "back-to-back angles" of a viscous type were broken, the ultimate strength was 620-650 N/mm. The test results are considered satisfactory.

Our company operates a DC welding machine MTV 8002-2 from the beginning of 2009.

The machine is manufactured according to our technical specification at the enterprise "Technosvar KS" Ltd., Pskov.

During the operation the machine proved itself on the positive side. 

After the introduction of the equipment mentioned above, the quality of work performed by spot welding of critical structures has increased significantly, unproductive losses have decreased, and the period of preparatory and adjustment work has decreased.