RADS-01 ARGON ARC WELDING RECORDER

order

description
technical parameters

Argon arc welding recorder RADS-01 is intended for continuous tracing of welding parameters, such as:

welding current;

welding arc voltage;

supply voltage;

welding rate;

filling wire feed rate;

clamping pressure;

shielding gas consumption;

heating and upsetting time;

welded parts’ temperature, etc.

Usage of welding recorders is a comprehensive solution in welding process operation allowing for accurate (more than 99%) real-time automatic recording of welding parameters with certification of each weld joint.

An electronic report includes data of the product, operator, start and end time of the process. It is stored in the host computer and can be printed.

Data monitoring allows for troubleshooting of supply sources and analyzing noncompliance with process and quality standards.

*Please pay attention that the technical specification and the appearance of the equipment placed on this web-site are only for informational purpose and are not a public offer. The producer reserves the right to make any changes.

**Copying the data without permission of the web-site administration is prohibited.

Displaying of welding parameters	in the real time
Monitored parameters' values	in digitalized form
К Monitored parameters: - welding current - welding arc voltage - supply voltage - welding rate - filling wire feed rate - argon consumption	up to 1000 А up to 100 V up to 400 V up to 40 m/hr up to 100 m/hr up to 30 l/min
Protection from oscillator	up to 15 kW
Arc current measurement in any cable (grounding or welding)	proximity sensor
Welding processes recording in the electronic form	internal memory data storage with subsequent data transferring to the host computer for storage and processing
Data tracing (product, operator, start and end time information)	in electronic form
Generation of reports, which include data of welding processes, product, operator, start and end time of the process	in electronic form allowing for printing
Frequency of recorded arc current and voltage	1 Hz
Frequency of recorded three-phase voltage	1 Hz
Measurement accuracy	not worse than 1% of max. value
Distance between welding units	from 6 to 20 m
Continuous recording time of welding parameters	not less than 2 hours
Recorder-ECM interface	RJ-45