UKP-02 FN4 RESISTANCE SOLDERING UNIT

order

description
technical parameters

Electric resistance soldering unit UKP-02 FN4 equipped with special tools is intended for high-quality resistance heating of parts during soldering of silver contact tips.

*Please pay attention that the technical specification and the appearance of the equipment placed on this web-site are only for informational purpose and are not a public offer. The producer reserves the right to make any changes.

**Copying the data without permission of the web-site administration is prohibited.

Supply voltage, V	380
Frequency, Hz	50
Max. soldering current at short circuit, kA	16
Power at duty cycle = 50%, kVA	79
Long-time power, kVA	56
Long-time secondary current, kA	4,5
Long-time primary current, A	148
Max. primary current at short circuit, A	552
Cable cross-section area, mm2	35
Welding power adjustment	Плавно-ступенчатое
Number of steps for welding power adjustment	8
Rated step of adjustment	7
Phase adjustment range, %	22...100
Step secondary voltage at parallel connection of secondary winding: step 1, V maximum step, V	5,84 12,6
Transformer ratio by steps at series connection of transformer secondary winding: step 1 step 8	62,50 29,00
Rated outreach, mm	300
Rated opening, mm	150
Upper electrode travel maximum, mm minimum, mm	100 5
Heating-up during soldering	контактный, электросопротивлением
Electrodes gripping drive	пневматический
Max. electrodes pressing force at pressure of 0.5 MPa, daN	400
Min. electrodes pressing force at compressed air pressure of 0.05 MPa, daN	20
Solder joint cross-section area, mm2	40...82
Heating time, sec	0,02...5
Consumption of compressed air at rated pressing force and working travel of 10 mm, m3/100 strokes	0,65
Cooling water consumption, l/hr	700
Max. overall dimensions length, mm width, mm height, mm	1750 520 2300
Max. weight, kg	1150
he machine includes: Transformer TVK-75, pc. Thyristor contactor KT-07, pc. Resistance welding regulator RKS-810P, pc.	1 1 1

deklaratsiya-paechnyie-mashinyi-serii-ukp_nLpuriG.pdf