Полезные и интересные видео на нашем канале!

Техническая информация, обзоры производимого оборудования!

Перейти в YouTube
Technosvar Technology Center
En
Более 10 лет с вами
Give me a call
Close
Give me a call

Fill out the form and we will call you back!

Work time
с 08:00 до 18:00 Мск

I agree with the rules of the site and to the processing of my personal data in accordance with the requirements Federal law of 27 July 2006 №152-FZ «On personal data»

МТ-1930 AC SPOT WELDING MACHINE

  • Building

Welding machine MT-1930 is designed for contact spot welding by alternating current of metal structures and products. Technological capabilities of this welding machine allow welding of a wide range of products. The thickness of the material to be welded depends on the material type and quality requirements to the welded joint.

Welding thickness ranges

Low carbon steel 0,5+0,5 to 3,0+3,0 mm*
Low alloy steel 0,5+0,5 to 2,0+2,0 mm*
Stainless steel 0,3+0,3 to 1,5+1,5 mm*
Titanium alloys 0,5+0,5 to 2,5+2,5 mm*
Chromium-nickel alloys 0,5+0,5 to 0,8+0,8 mm*
Copper alloys 0,3+0,3 to 0,8+0,8 mm*
Aluminum alloys 0,5+0,5 to 0,6+0,6 mm*

Diameter ranges for welded cruciform joints of rod reinforcement

Class АI, BI 8+8 to 16+16 mm*
ClassAII, AIII 8+8to 12+12 mm*

* When welding parts of different thicknesses, the welding mode is determined by the smallest thickness of the part.

Advantages of the welding machine МТ-1930

  • It is produced of Russian raw materials that have all the necessary certificates
  • Microprocessor control based on the contact welding regulator RKS-810, also produced by us, can store 20 welding programs in memory and consistently reproduce the welding parameters
  • Setting of welding parameters on the front panel of the RKS-810 contact welding regulator and digital indication of the set parameters
  • As a source of welding current we use a transformer, also produced by us, filled with epoxy compound
  • Liquid cooling of the welding transformer, secondary circuit

Additional options

  • Autonomous liquid closed cooling system
  • Autonomous compressor device
  • Electrodes for contact welding of various configurations
  • Assembly and welding devices 

 

 

 

         *Please pay attention that the technical specification and the appearance of the equipment placed on this web-site are only for informational purpose and are not a public offer. The producer reserves the right to make any changes.

         **Copying the data without permission of the web-site administration is prohibited.

Mains voltage at 50Hz frequency 380 V
The highest secondary current 19 кА
Rated continuous secondary current 9 кА
Maximum power in case of short circuit 138 кVа
Power at 50% duty cycle 78 кVа
Compression force of electrodes:
- the largest at compressed air pressure of 0.5 MPa
- the smallest at compressed air pressure of 0.1 MPa

770 dаN
150 dаN
Nominal stick-out 500 mm
Nominal spacing 180 мm
Upper electrode stroke:
- full (working + additional)
- working

80 mm
5 to 30 mm
Limits of idle voltage adjustment 2,64 to 6,29 V
Welding power adjustment:
- stepped
- phase

4 steps
25 – 100 %
Electrode compression drive pneumatic radial
Cooling of current-carrying parts forced liquid
Overall dimensions of the machine (L×W×H), no more than 1290×365×1905 mm
Weight, not more than 600 kg
Need help?
Close
You need help selecting equipment?

Just fill out the form and we will find what You are looking for!

I agree with the rules of the site and to the processing of my personal data in accordance with the requirements Federal law of 27 July 2006 №152-FZ «On personal data»

Наверх