The MTP-05 mobile welding machine is designed for one-sided contact spot welding with alternating current.
Technological capabilities of this welding machine allow welding of a wide range of products. The thickness of the material to be welded depends on the material type and quality requirements to the welded joint.
Welding thickness ranges
| Low carbon steel | 0.3+0.5 to 2.0+2.5 mm* |
| Stainless steel | 0.5+0.5 mm* |
* When welding parts of different thicknesses, the welding mode is determined by the smallest thickness of the part.
Advantages of the welding machine MTP-05
- It is produced of Russian raw materials that have all the necessary certificates
- Microprocessor control based on the contact welding regulator RKS-810, also produced by us, can store 20 welding programs in memory and consistently reproduce the welding parameters
- Setting of welding parameters on the front panel of the RKS-810 contact welding regulator and digital indication of the set parameters
- As a source of welding current we use a transformer, also produced by us, filled with epoxy compound
Additional options
- Autonomous liquid closed cooling system
- Technical characteristics of the current source
*Please pay attention that the technical specification and the appearance of the equipment placed on this web-site are only for informational purpose and are not a public offer. The producer reserves the right to make any changes.
**Copying the data without permission of the web-site administration is prohibited.
