Полезные и интересные видео на нашем канале!

Техническая информация, обзоры производимого оборудования!

Перейти в YouTube
Technosvar Technology Center
En
Более 10 лет с вами
Give me a call
Close
Give me a call

Fill out the form and we will call you back!

Work time
с 08:00 до 18:00 Мск

I agree with the rules of the site and to the processing of my personal data in accordance with the requirements Federal law of 27 July 2006 №152-FZ «On personal data»

МТP-07 mobile spot welding machine

The MTP-07 mobile welding machine is designed for one-sided contact spot welding with alternating current.

Technological capabilities of this welding machine allow welding of a wide range of products. The thickness of the material to be welded depends on the material type and quality requirements to the welded joint.

Welding thickness ranges

Low carbon steel 0.7+1.5 to 1.5+2.5 mm*
Stainless steel 0.7+1.5 to 1.5+2.5 mm*

* When welding parts of different thicknesses, the welding mode is determined by the smallest thickness of the part.

Advantages of the welding machine MTP-07

  • It is produced of Russian raw materials that have all the necessary certificates
  • Microprocessor control based on the contact welding regulator RKS-810, also produced by us, can store 20 welding programs in memory and consistently reproduce the welding parameters
  • Setting of welding parameters on the front panel of the RKS-810 contact welding regulator and digital indication of the set parameters
  • As a source of welding current we use a transformer, also produced by us, filled with epoxy compound

Additional options

  • Autonomous liquid closed cooling system
  • Autonomous compressor device

 

 

 

         *Please pay attention that the technical specification and the appearance of the equipment placed on this web-site are only for informational purpose and are not a public offer. The producer reserves the right to make any changes.

         **Copying the data without permission of the web-site administration is prohibited.

Mains voltage at 50Hz frequency 380 V
The highest secondary current 19 kA
Rated continuous secondary current 4 kA
Maximum power in case of short circuit 111 kVA
Power at 50% duty cycle 33 kVA
Electrode compression drive pneumatic
Electrode stroke rectilinear
Limits of idle voltage adjustment up to 5,6 V
Welding power control phase
Welding power control limits 25 — 100 %
Cooling of current-carrying parts forced liquid
Overall dimensions (LxWxH), not more than: 445x445x1090
Weight, not more than 65 kg
Need help?
Close
You need help selecting equipment?

Just fill out the form and we will find what You are looking for!

I agree with the rules of the site and to the processing of my personal data in accordance with the requirements Federal law of 27 July 2006 №152-FZ «On personal data»

Наверх