Hanging welding machine МТP-02 is designed for contact spot welding with alternating current of spatial reinforcement frames and volumetric products using welding tongs with pneumatic cylinder.
Technological capabilities of this welding machine allow welding of a wide range of products. The thickness of the material to be welded depends on the material type and quality requirements to the welded joint.
Welding thickness ranges
| Low carbon steel | 0.5+0.5 to 2.0+2.0 mm* |
| Low alloy steel | 0.5+0.5 to 1.0+1.0 mm* |
| Stainless steel | 0.3+0.3 to 0.8+0.8 mm* |
| Titanium alloys | 0.3+0.3 to 0.8+0.8 mm* |
| Chromium-nickel alloys | 0.5+0.5 to 0.8+0.8 mm* |
| Copper alloys | 0.3+0.3 mm* |
| Aluminum alloys | 0.3+0.3 mm* |
Diameter ranges for welded cruciform joints of rod reinforcement
| Class АI, BI | 3+3 to 10+10 mm* |
| Class AII, AIII | 6+6 to 8+8 mm* |
*When welding parts of different thicknesses, the welding mode is determined by the smallest thickness of the part
Advantages of the welding machine MTP-02
- It is produced of Russian raw materials that have all the necessary certificates
- Microprocessor control based on the contact welding regulator RKS-810, also produced by us, can store 20 welding programs in memory and consistently reproduce the welding parameters
- Setting of welding parameters on the front panel of the RKS-810 contact welding regulator and digital indication of the set parameters
- As a source of welding current we use a transformer, also produced by us, filled with epoxy compound
- Liquid cooling of the welding transformer, flexible current-carrying cables and welding tongs
Additional options
- Autonomous liquid closed cooling system
- Autonomous compressor device
- Spring balance
- Hanger bracket
*Please pay attention that the technical specification and the appearance of the equipment placed on this web-site are only for informational purpose and are not a public offer. The producer reserves the right to make any changes.
**Copying the data without permission of the web-site administration is prohibited.
